Silkcoat Acrylic Astar Ethiopia

DESCRIPTION:Acrylic  copolymer binder based, water based, grained, white primer coating.

CHARACTERISTIC:  Primer used on mineral-based and absorbent surfaces , in topcoats  to provide adhesiveness to the paint , to reduce the paint consumption and to obtain a homogeneous surface.

APPLICATION SURFACES: Can be applied on all kinds of exterior and interior prepared surfaces to obtain a jagged surface.

TECHNICAL INFORMATION:

Structure: Stiren Acrylic

Consumption: Single coat: 12- 14  (m²/lt), 110-140 (g/m²)

Thinning Ratio: 15-20 %

Recommended Primer: Silkcoat Acrylic Exterior Putty.

Application tools: Brush, Roller.

Drying: After 4- 12 hours depending on weather conditions.

Viscosity: 115 KU ±10  (  23 º C )

pH: 8- 9

Density: 1,61 ± 0,05 ( g / ml )

Amount of solid: ( 69 ± 2 ) %

Brilliance: at 85º  7 ± 3

Thickness of dry coat: ( 30 ± 5 ) micron

Thickness of wet coat: ( 70 ± 5 ) micron

APPLICATION:

The application surface should be free from all kinds of dust, dirt and oil. Surface defects and cracks are repaired with Silkcoat External Putty and smoothed to obtain a clean, dry and solid surface. Silkcoat Acrylic Primer is applied in a single layer by thinning with 30-40% of clean water. Silkcoat Acrylic Primer can be applied by roller, brush or spray. Ambient and surface temperature should be between + 5ºC and + 30ºC during application and product drying and should not be applied during rainy weather.

CAUTION:

Avoid getting eye and skin contact. In case wash  with plenty of water.

Preserve in a tightly closed container.

Keep above  the reach of children

Do not dump into sewer system.

STORAGE:  Keep  at a cool and clean place away from sun light. İt can be stored  unopened 1 year  at room temperature.

PACKAGING: 15 lt– 2,5 lt PE bucket