Silkcoat Smart Colours Ethiopia

Product Description: Powder polymer based, healthy, colourable, decorative interior wall covering material.

Features: Smart Prestige Series Silk Plaster, which contributes to heat and sound insulation, is anti-static and does not collect dust. In addition to its easy application, it does not harm human health and the environment due to its water-based structure. It is odorless and breathable.

Application Areas: Smart prestige silk plaster can be applied to thin plaster, gypsum plaster, plasterboard, wooden surfaces and non-alkali surfaces. It is not applied to glass, brick, metal surfaces, exterior facades and wet floors.

Technical Data:

Structure: Powder polymer

Consumption: 4 m²/bag

Thinning Rate: For 1 bag: 1 box of Natural Silk Polish + 3 Kg of water.

Drying Time: 24 hours

Application Thickness: 1 mm

Application: The application surface must be cleaned of all kinds of dust, dirt and oil. After lightly sanding all swollen and old painted surfaces, a clean, dry and solid surface should be obtained. Smart Primer should first be applied to newly plastered surfaces. On old painted, dirty, damp surfaces, paint, dirt, soot and similar residues on the surface are thoroughly cleaned. After the primer application dries, silk plaster application can be started. Colorless Natural Silk Polish can be colored in the desired color from the Smart color chart. Then, approximately 3 Kg of water is added to the colored polish and mixed until it reaches a homogeneous consistency.

The material in the bag is added to the colored Natural Silk Polish/Water mixture and kneaded thoroughly. Depending on climate and application conditions, some more water can be added if necessary. After the prepared material rests for at least 20 minutes, it is applied to the surface with the plastering technique using a plastic trowel, with an average thickness of 1 mm. The surface should not be left unfinished during application. After the application is completed, the tools used should be cleaned with water immediately. Application can be made with a plastic trowel and spray gun. On newly plastered surfaces, at least 28 days must be waited before applying paint to the surface. Ambient and surface temperature should be between +5ºC and +35ºC during the application and product drying period.

Warnings: Keep the product in a tightly closed container. Do not pour it into the sewer.

Storage: It can be stored for at least 1 year in a cool, clean and dry environment, without being exposed to direct sunlight and without opening the product container.

Packaging: Bag/Natural Silk Lacquer. 1 Bag 600 G